Small Flying Arts

I understand your situation. I was nearsighted and wore glasses most of my life. When I had cataract surgery I chose distance lenses. My wife thought that this was a mistake since I now need two pairs of reading glasses one for reading and one for the computer. She doesn't fly models. ;)

At the outskirts it guesswork :D
Like when I saw the wing dip - I saw it but wasn't sure which way. My eyes are not the best though and I really should wear glasses but they affect the way I see things. I guess I have flown without forever and adjusting would require some time.

Very impressive for a model that is 50 grams with only a 15.5 inch wing span! I know that the video does not give the same resolution as the Mk 1 eyeball but do you have any trouble keeping it in sight?

KF

I was working on a 20mm EDF fan unit some time ago and although the fan was done, I had no jet to put it in. My thoughts were for it to be a replacement for jetex motors since the rules are quite strict Down Under, so a jetex plan seemed the logical choice. I settled on a DH108 Swallow designed by Steve Bage. It came in at 50g inc. battery.
Wingspan: 15.5"
Battery: 150mah 2S
Receiver: Orange micro 4 channel
Fan: Custom built 20mm EDF (3D printed on a Michelangelo) using a 0703 outrunner and clipped 3 blade micro quad-copter propeller.

Maiden was a little squirelly!
https://www.youtube.com/embed/BLnQS6RbK-8

After a mod the next flights were much better!
https://www.youtube.com/watch?v=CjmBGM5Uf1Q


[attachment=3]DH108_9.jpg[/attachment]

[attachment=2]DH108_13.jpg[/attachment]

[attachment=1]DH108_final.jpg[/attachment]