Rubber power meeting spring 17 in Switzerland

[rgroener]

I just realised, that I did not post it here on SFA.

This year we have again a spring meeting of rubber power enthusiasts in switzerland.
On a brand new field in Rapperswil-Jona at the lake of Zuerich.

Date is the 25. March (Saturday) 2017

It is open to everybody. If someone is interested, please send me a pm, I will be happy to give more detailed information or answer your questions.
This is no competition, just pure rubber power fun. It doesnt matter if its a kit or scratch build, small or big, as long as it is driven by rubber power.

Roman

If you havent seen the pics already on HPA, here are some from our meeting last fall.

[g_kandylakis]

With a week's delay, here are some photographs from this nice event. It was only two hours drive for me, so it was possible to spend a nice Saturday.

The weather cooperated only partly: we had the (as it seems typical ) swiss clear skies, but also a consistent medium strong wind, which did not allow perfect flights, especially for untrimmed models. The grass was high enough to protect the models, so no major damages were recorded.

Overall a very nice event, well organised by Roman, who received the credit by those present.

Plenty of models of all types and sizes, rubber powered only (with only two minor exceptions)

Here are some photographs I managed to take. Sorry, no captions.

DSC08388.JPG (651.98 KiB) Viewed 29617 times

DSC08433.JPG (528.22 KiB) Viewed 29615 times

DSC08389.JPG (675.7 KiB) Viewed 29617 times

DSC08394.JPG (658.25 KiB) Viewed 29617 times

DSC08395.JPG (649.38 KiB) Viewed 29617 times

[g_kandylakis]

DSC08396.JPG (666.19 KiB) Viewed 29617 times

DSC08397.JPG (666.48 KiB) Viewed 29617 times

DSC08398.JPG (640.34 KiB) Viewed 29617 times

DSC08399.JPG (643.82 KiB) Viewed 29617 times

[g_kandylakis]

DSC08400.JPG (607.24 KiB) Viewed 29617 times

DSC08401.JPG (590.02 KiB) Viewed 29617 times

DSC08402.JPG (512.63 KiB) Viewed 29617 times

DSC08403.JPG (327.96 KiB) Viewed 29617 times

[g_kandylakis]

A commemorative photograph of those present (1 or 2 might have left earlier...)

DSC08411.JPG (415.3 KiB) Viewed 29617 times

DSC08404.JPG (474.9 KiB) Viewed 29617 times

DSC08425.JPG (388.44 KiB) Viewed 29617 times

DSC08426.JPG (388.79 KiB) Viewed 29617 times

[g_kandylakis]

Following are some pictures of very lightweight rubber EDF models by Thanh Pham. Most impressive, even though not yet finished

DSC08413.JPG (346.93 KiB) Viewed 29617 times

DSC08414.JPG (291.26 KiB) Viewed 29617 times

DSC08415.JPG (358.72 KiB) Viewed 29617 times

DSC08416.JPG (291.48 KiB) Viewed 29617 times

[g_kandylakis]

DSC08418.JPG (291.75 KiB) Viewed 29617 times

DSC08419.JPG (265.33 KiB) Viewed 29617 times

DSC08421.JPG (215.6 KiB) Viewed 29617 times

DSC08422.JPG (218.05 KiB) Viewed 29617 times

DSC08423.JPG (375.66 KiB) Viewed 29616 times

[g_kandylakis]

An unexpected bonus for me was the passing by at high altitude of two Junkers 52 3m. Regular visitors at airshows in Switzerland and Germany, but a completely new sight for me. My camera did the best it could (not enough...) so here are some cropped images.

DSC08391.JPG (397.71 KiB) Viewed 29613 times

DSC08405.JPG (533.45 KiB) Viewed 29613 times

DSC08407.JPG (559.23 KiB) Viewed 29613 times

Well, that is all for now...

George

[Tim H]

Thanks for those George; a nice selection of models under a perfect Swiss blue sky! Can you tell us any more about the ducted fan model? I presume it is a homemade fan unit? Did you get to see it fly or was it too windy?

How did the Bellanca do? I hope Roman got some video of it and some other models flying or was he too busy having fun (and doing the event organisation of course!).

[g_kandylakis]

Hi Tim,

The ducted fan models and units are all homemade. The models shown are not yet finished, so no flying...

The Bellanca did average well. It flew, despite the wind, but not for a very long time. but I need to find the proper rubber size and length. The one I am currently using has a strong initial burst (not needed) and not enough duration. In a year I will have it sorted out, I think...

There are some videos, medium quality... We 'll see.

George